T4W Air vacuum dent puller kit
With our vacuum dent puller you can quickly and effectively remove dents from a car body without damaging the paint. It’s simply connected to a compressed air system. By pressing the reversing lever under pressure on the sucker grows and the sucker can be easly attached to the car body. The bump can now be pulled out.
Features:
- Comes with 3 suction pads: Ø 75 mm, 100 mm, 125 mm
- Compressed air connection: 1/4” internal thread
- Air consumption: 20 l/min
- Length: aprox. 620 mm
- Weight (slide hammer without suction cups): 2.37 kg
- Weight (entire set in case): 4.35 kg
- Working pressure: 6.2 to 10.3 bar (90-150 PSI) - for optimum operation even with the smallest adapter is a pressure of min. 10.3 bar required!
- Get the power and versatility of a slide hammer without marring the finish by welding or drilling body panels
- Pneumatic control creates a super-strong vacuum, making it easy to pull most dents out of panels
- Instantly remove most dents without damaging paint
- Requires air compressor – no drilling, welding or standing required
- 4” and 5” rubber cups for small and large dents
- Urethane air supply hose with check valve.
| Product code | Weight |
| 59475 | 4,35 kg |
Product gallery
Related Products
T4W ELCS Disposable Cups System 750ml
ELCS (eXpert line cup system) is a new mixing cup system for painting, refilling and storing of paint material. ELCS System is a disposable cup fully complying with the requirements of professional painters and bodyshops. ELCS System includes 4 components: cup – lid – strainer – adapter. Features: Simple and quick preparation of paint material […]
T4W Paint stirring mixing stick
Our stirring sticks offer the following advantages: The recess on one border allows reaching the entire inner wall of the container The position and shape of the recess itself grants easy working of the stirring stick for various kinds of tins The stirring sticks has blade-shaped border on one side, making it possible to complete […]
T4W eXpert line SR10 Silicone Remover FAST
The silicone remover is designed for degreasing the destined surface before applying any kinds of coats. It prevents from blistering or craters formation in freshly applied coatings. The product is dearomatized in order to neutralize the tang.
T4W eXpert line TA+ SLOW Acrylic Thinner
Acryl thinner corresponds to highest quality standards and is suitable for dilution of pastel colors, 2K acrylic paints and acrylic primers. It is characterized by slower evaporation time, which is why it can be used for painting of large surfaces. Do not use below 25°C. Features: Recommended for: acrylic pains, acrylic primers Working temperature 25-35 […]
Downloads
Order the current catalog T4W on paper.
Write to us in this matter, and our sales consultant will contact you and will gladly send a catalog to the indicated address.




